![\"\"](\"https:\/\/www.k2ie.net\/blog\/wp-content\/uploads\/2019\/04\/image.png\")
<\/figcaption><\/figure>\n<\/figure>\n\n\n\n
To enable DMRGateway change DMR Master to DMRGateway (very top entry).<\/p>\n\n\n\n Click apply changes and wait for the menu to come back up. Next change XLX Master to XLX_020. XLX Startup Module will usually be either A (Central New Jersey) or C (Beyond New Jersey, including REF020A & Peanut users). Turn on the XLX Master Enable slider.<\/p>\n\n\n\n Click apply changes. Once the configuration above has been applied you should be ready to go. Next, program the radio.<\/p>\n\n\n\n To talk via DMR on an XLX reflector, you’ll need to use a channel programmed with TG 6. Also set up a receive group list with TG6 so you will receive signals from the hotspot. <\/p>\n\n\n\n If you want to move your hotspot between reflectors and modules, commands are sent via a private call. These should be entered into your digital contact list.<\/p>\n\n\n\n See you in 020 land.<\/p>\n\n\n\n 73 Some simple changes must be made to the configuration of a Pi-Star based hotspot before it can access an XLX Reflector. Thanks to our partner in the “020 Project”, Scott <KB2EAR>, who helped with following guidance. To connect to XLX020 via DMR you must configure your Pi-Star hotspot to use DMRGateway. Before you begin, make … Continue reading “Pi-Star Configuration for XLX020”<\/span><\/a><\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[4,6],"tags":[15,146],"class_list":["post-770","post","type-post","status-publish","format-standard","hentry","category-radio","category-technology","tag-dmr","tag-xlx"],"_links":{"self":[{"href":"https:\/\/www.k2ie.net\/blog\/wp-json\/wp\/v2\/posts\/770","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.k2ie.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.k2ie.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.k2ie.net\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/www.k2ie.net\/blog\/wp-json\/wp\/v2\/comments?post=770"}],"version-history":[{"count":8,"href":"https:\/\/www.k2ie.net\/blog\/wp-json\/wp\/v2\/posts\/770\/revisions"}],"predecessor-version":[{"id":1090,"href":"https:\/\/www.k2ie.net\/blog\/wp-json\/wp\/v2\/posts\/770\/revisions\/1090"}],"wp:attachment":[{"href":"https:\/\/www.k2ie.net\/blog\/wp-json\/wp\/v2\/media?parent=770"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.k2ie.net\/blog\/wp-json\/wp\/v2\/categories?post=770"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.k2ie.net\/blog\/wp-json\/wp\/v2\/tags?post=770"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}![\"\"](\"https:\/\/www.k2ie.net\/blog\/wp-content\/uploads\/2019\/04\/image-1.png\")
<\/figure>\n<\/figure>\n\n\n\n![\"\"](\"https:\/\/www.k2ie.net\/blog\/wp-content\/uploads\/2019\/04\/image-2.png\")
<\/figure>\n<\/figure>\n\n\n\n6 Group Call - Talk on the XLX Reflector\n64000 Private Call - Disconnect Channel\n64001 Private Call - Switch to Module A\n64002 Private Call - Switch to Module B\n64003 Private Call - Switch to Module C\n64004 Private Call - Switch to Module D\n64005 Private Call - Switch to Channel E\n64006 Private Call - Switch to Channel F\n...\n64026 Private Call - Switch to Module Z\n65000 Private Call - Query Status\n68020 Private Call - Connect to XLX Reflector 020<\/pre>\n\n\n\n
XLX020A<\/s> XLX020D is the gateway to the CNJHAM\/TG31340 bridge. <\/p>\n\n\n\nXLX020C<\/s> XLX020A is the gateway to the REF020A\/TG31675 bridge.<\/p>\n\n\n\n
<\/p>\n","protected":false},"excerpt":{"rendered":"